Orbi Purple Light Error or Magenta LED Orbi Router

Orbi Router Flashing Purple Light

Seeing Orbi purple light or solid magenta LED flashing on Orbi satellite? After Orbi setup, Orbi WiFi router flashes purple light or magenta LED stuck on Orbi satellite. Indicating orbi satellite sync failed or Orbi not connecting.  An issue faced by Orbilogin.net users is that orbi router showing solid purple LED. 

The Orbi Wi-Fi router upholds network wifi remote innovation because of which the majority of the clients get confused on the best way to determine the glitch on Orbi wifi router.

Orbi purple light error or magenta LED on Orbi satellite

Solid Purple Light on Orbi router - Reasons

What causes blinking purple light on Orbi router and satellite and how to sort out orbi purple or magenta LED on Orbi using orbilogin.net or orbilogin.com login.

Orbi purple light error or blinking magenta light on Orbi satellite?

Let us tell you that Orbi router magenta LED error can occur due to a number of reasons. The most common reason for purple LEDs on Orbi router or solid magenta LED on Orbi satellite indicates- 

  • Orbi WiFi router not connecting to satellite
  • Placement of Orbi and satellite is not proper
  • Orbi satellite synced failed
  • Orbi router setup and installation error
  • Network error on your device.

These are common reasons that may cause beeping purple light on Orbi, and showing dark pink LED on Orbi router.

Orbi purple light error due to Internet network issue

The most widely recognized justification for purple LEDs on Orbi router is network glitch on your device. It is one of the reasons because of which you see purple or magenta LED light on Orbi router.

Magenta LED on Orbi router because Orbi satellite sync failed

When the Orbi router fails to connect with the satellite. Orbi satellite sync failed and orbilogin.net unable to detect Ori satellite. The orbi satellite setup issue shows by flashing a steady magenta LED on Orbi satellite.

If Orbi not connecting to satellite or keep disconnecting. Orbilogin.net not able to detect connected satellite, read how to sync Orbi satellite or fix orbi not connecting to satellite.

Orbi satellite showing purple light due to Wiring or connection Issue

Web wiring or fiber link has a type of mileage. Or you can say internet wire or cable has some trouble they may be disconnected.

Router Under Diagnosing Cause Solid Purple LED On Orbi

Your Orbi wifi router has gotten through various issues and it is running some framework diagnosting measures.

Low Web Network lead flashes purple light on Orbi rbr50

Purple LED on Orbi router may even come in case there is some issue in the web network from the finish of your web access supplier.

RJ45 ethernet cable not connected may shows pink light on Orbi

The WLAN port of your Orbi WiFi router is not connected properly with your RJ45 ethernet cable.

Magenta light on Orbi satellite due to Orbi wifi setup issue

You may see Orbi router flashing purple light in case there are a few changes in the setup of the wireless router.

Longer hours of inactivity leads solid magenta LED on Orbi

Significantly longer time of inactivity  or inactive remote organization make you experience these sorts of issues.

Orbi ax6000 purple light due to Corrupted firmware

Slammed or outdated firmware likewise assume an extensive part in keeping you from utilizing the remote organization of the Orbi wifi router. 

  • Downloaded the Firmware update from Untrusted or Unsecure website: Infections and malwares can likewise debilitate your Orbi wifi framework from working in an ordinary manner.

Orbi Router Purple light or Magenta LED on Orbi Satellite - Troubleshoot

Knowing the reasons why orbi emitting purple LED or Orbi satellite shows steady and solid magenta light. If getting purple light on Orbi satellite after power outage or orbilogin.net setup disconnected, you can try below mentioned steps to troubleshoot Orbi purple light issue on router or satellite.

Fix Orbi Purple Light Error by Rebooting

  • Firstly, Reboot the Orbi Router .
  • Turning off the supply and waiting for a few minutes will help you to get back to a stable state.

Check Connection to resolve solid purple light on Orbi

Check your wireless devices like your tabs, mobiles which are connected to Orbi Wi-Fi router. There are some instructions to keep in your mind and follow nicely. You might be doing some mistake. Be careful while following the instructions. This can solve the trouble.

Check WAN Configuration Issue To get rid purple or magenta LED on Orbi

You may be facing Purple light just because the WAN port is disconnected .

Resolve Orbi satellite purple solid LED issue by Contact ISP

It may be you are lost or have a low internet connection. Check your internet service provider.

Purple LED On Orbi Router- Advanced Troubleshoot

Ensure Orbi connected to computer or laptop and check orbilogin.net or orbilogin.com can detect and connect to satellites

After checking the common reason that causes Orbi purple light error, Orbi satellite solid magenta LED after Orbi WiFi router setup or connecting with satellite. Try these advanced troubleshooting to resolve Orbi router purple light issues. 


  1. Make sure about your ethernet cable .It must be properly plugged into the ports.
  2. The adapter must be attached to the Orbi Wifi router properly .If you are using a third party adapter for your Orbi router, make sure its output is equivalent to the original one.
  3. Disconnect the cables and turn OFF the router.Turn it ON after a few minutes.
  4. Check to guarantee there is a cat5e wire from your web modem and your Orbi WAN port. 
  5. Turn off the router for a moment , disconnect all the wires.It might turn the purple light to white light.
  6. Switch the web orbi router or modem back. Furthermore, presently you need to pause. During this time it will boot
  7. After, when the status ‘completely booted’ on Orbi Router.

If Orbi flashes purple light after Orbi satellite sync with Orbi WiFi. It means Orbi not connecting to satellites, you need to check and ensure Orbi router setup is done properly. And installation of Orbi router and configuration of Orbilogin.net admin panel.

Fix Orbi purple light error by Orbi router setup

Setting up an Orbi router at your organization. Any of your devices can be used to set up the Orbi Router. An iOS device, such as an iPad, iPod, or iPhone, can be used to configure this router. 


The web browser http://orbilogin.net or http://orbilogin.com can also be used to connect the Orbi router to your home’s Wi-Fi system. The Orbi router setup procedure is fairly simple; all you have to do is carefully follow the procedures outlined below. 

To set up this Orbi WiFi router setup, you can also utilise the official Orbi app.

Some of the steps are given below to setup orbi router:

Configuring Orbi Wi-Fi Router

  • The first step is to unplug the modem and wait 30 seconds before plugging it back in. 
  • After 30 seconds, reconnect the modem. 
  • This is the procedure for resetting the modem. 
  • This provides you a new IP address, which makes the orbilogin.net setup process go more smoothly.

Orbilogin.net Setup With Ethernet To Fix Orbi Solid Magenta LED Error

  • Now connect the ethernet connection from the modem to the ethernet port on the Orbi Router, which is the yellow-colored port.The yellow port is on the orbi router.
  • After that, connect the power cable to the main router through the power adapter. The power cable is included in the package.
  • Turn on the Power button once you’ve completed the aforementioned steps.
  • After that, push the Router’s Power button, which is located on the back. The green flashlight will turn on as soon as you hit the Power button.
  • The white LED star appears when the router is turned on.

Ensure Orbi satellite setup/Orbi Satellite Sync Properly

Orbi satellite sync failed causes Orbi purple LED error ro magneta light on Orbi router
Fix Orbi flashing magenta light or emitting dark pink light

It is recommended that you install the Satellite in the centre of your home for the fastest connectivity. It provides uninterrupted, quicker, and more consistent connectivity.


  • Connect the Satellite to a power source and press the power switch ON.
  • Press the power button on the backside of the Satellite after turning on the power switch.
  • The green-colored light starts flashing as soon as you press the power button.
  • The Orbi’s Satellite’s LED light goes white.


In the first three minutes, the Satellite’s LED flashes three different colours. Which colour corresponds to the information provided below.


Solid Blue Light:

The primary router’s solid blue light shows that it is fully connected.

Amber (Orange) Light:

When the Satellite’s LED light becomes Amber, it indicates the Wi-Fi router and the Satellite are in sync and the connection between them is stable. The Satellite gadget should be approached with caution, as indicated by the amber light.

Magenta ( Purple) Light:

Magenta light signals a failed Orbi satellite sync process. Both the satellite and the router are out of sync.


More information regarding the light indications on the main router and satellite can be found in the user manual included in the package.

Update Orbi Firmware To Get Rid Of Solid Purple Light On Orbi Error

Ensure that you are refreshing the Orbi’s firmware when it is essential. Login orbilogin.com  and setup orbilogin.net.

Turn Orbi purple light To Green by upgrading firmware:

  • Get on your computer and go to the orbilogin.net orbilogin.com login panel.
  • Surf the website to find out more about the current firmware that is available.
  • Save the firmware to a convenient location on your computer.
  • Then, in a new browser window, type www.orbilogin.com in the URL field and hit enter. Refer, if orbilogin.net not working to fix orbilogin.com error.
  • It will take you to your Orbilogin Screen’s login page, where you may input your user credentials and log in.
Update orbi firmware to fix Orbi purple light error or Orbi satellite showing magenta LED Orbi flashing purple light
  • Locate ADVANCED> under this tap, you’ll see the ADMINISTRATION option, select Firmware update from it once you’ve logged in and accessed the BASIC homepage.
  • Select the downloaded firmware file from the browser window and click open.
  • Wait for the firmware to finish uploading.
  • Your updated firmware is ready to use.

After updating WiFi router firmware, go for reboot the device. Check the LED on Orbi router and satellite, If orbi stuck on magenta LED or dark pink. Then do reset the WiFi device, to its default factory setting.

Fix Orbi Flashing Magenta LED By Reset Orbi To Its Factory Setting

If we reset the Orbi router it will make changes. Any unique settings you’ve made, such as wireless names and passwords, recovery options, Wi-Fi settings, and so on, will be erased if you reset your Orbi Wi-Fi system to factory default settings. The Orbi router will also be unsynced from the Orbi satellite during this operation.

After you’ve completed this step, you’ll need to re-sync and pair the Orbi router and satellite.


To reset the Netgear Orbi Router, go through the procedures below.

  • Ensure that your Orbi gadget is turned on.
  • Press and hold the Reset button with a paper clip or similar object until the Power LED on your Orbi device blinks amber.
  • Your Orbi router is Reset.


After following above mentioned steps you will surely recover from Orbi satellite solid magenta LED or orbi flashing purple light error. If not, and still getting constantly blinking dark pink light on orbi WIFi or Orbi emitting purple LED then do get help from orbilogin or setup experts to fix Orbi purple light trouble.